H3C SR8800-F Configuration Manual page 102

No. Subattribute
34 NAT-End-Port
59 NAS_Startup_Timestamp
60 Ip_Host_Addr
61 User_Notify
62 User_HeartBeat
98 Multicast_Receive_Group
100 IP6_Multicast_Receive_Group
101 MLD-Access-Limit
102 local-name
103 IGMP-Access-Limit
104 VPN-Instance
105 ANCP-Profile
106 Up-Priority
107 Down-Priority
135 Client-Primary-DNS
136 Client-Secondary-DNS
140 User_Group
144 Acct_IPv6_Input_Octets
145 Acct_IPv6_Output_Octets
146 Acct_IPv6_Input_Packets
147 Acct_IPv6_Output_Packets
148 Acct_IPv6_Input_Gigawords
Description
End port number of the port range assigned to the user when the
source IP address and port are translated.
Startup time of the NAS in seconds, which is represented by the
time elapsed after 00:00:00 on Jan. 1, 1970 (UTC).
User IP address and MAC address included in authentication and
accounting requests, in the format A.B.C.D hh:hh:hh:hh:hh:hh. A
space is required between the IP address and the MAC address.
Information that must be sent from the server to the client
transparently.
Hash value assigned after an 802.1X user passes authentication,
which is a 32-byte string. This attribute is stored in the user list on
the NAS and verifies the handshake packets from the 802.1X
user. This attribute only exists in Access-Accept and
Accounting-Request packets.
IP address of the multicast group that the user's host joins as a
receiver. This subattribute can appear multiple times in a
multicast packet to indicate that the user belongs to multiple
multicast groups.
IPv6 address of the multicast group that the user's host joins as a
receiver. This subattribute can appear multiple times in a
multicast packet to indicate that the user belongs to multiple
multicast groups.
Maximum number of MLD multicast groups that the user can join
concurrently.
L2TP local tunnel name.
Maximum number of IGMP multicast groups that the user can join
concurrently.
MPLS L3VPN instance to which a user belongs.
ANCP profile name.
User priority of incoming packets.
User priority of outgoing packets.
IP address of the primary DNS server.
IP address of the secondary DNS server.
User groups assigned after the SSL VPN user passes
authentication. A user can belong to multiple user groups that are
separated by semicolons. This attribute is used to work with the
SSL VPN device.
Bytes of IPv6 packets in the inbound direction. The measurement
unit depends on the configuration on the device.
Bytes of IPv6 packets in the outbound direction. The
measurement unit depends on the configuration on the device.
Number of IPv6 packets in the inbound direction. The
measurement unit depends on the configuration on the device.
Number of IPv6 packets in the outbound direction. The
measurement unit depends on the configuration on the device.
Bytes of IPv6 packets in the inbound direction. The measurement
unit is 4G bytes.
86