Specifying The Device Id - H3C SR8800-F Configuration Manual

Comware 7 user access
Hide thumbs Also See for SR8800-F:
Table of Contents

Advertisement

Restrictions and guidelines
When you configure the BAS-IP or BAS-IPv6 attribute for portal packets sent to the portal
authentication server, follow these restrictions and guidelines:
During a re-DHCP portal authentication or mandatory user logout process, the device sends
portal notification packets to the portal authentication server. For the authentication or logout
process to complete, make sure the BAS-IP/BAS-IPv6 attribute is the same as the device IP or
IPv6 address specified on the portal authentication server.
You must configure the BAS-IP or BAS-IPv6 attribute on a portal authentication-enabled
interface if the following conditions are met:
The portal authentication server is an H3C IMC server.
The portal device IP address specified on the portal authentication server is not the IP
address of the portal packet output interface.
Procedure
To configuring the BAS-IP or BAS-IPv6 attribute:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Configure the BAS-IP
attribute.
4.
Configure the BAS-IPv6
attribute.

Specifying the device ID

The portal authentication server uses device IDs to identify the devices that send protocol packets to
the portal server.
Make sure the configured device ID is different than any other access devices communicating with
the same portal authentication server.
To specify the device ID:
Step
1.
Enter system view.
Command
system-view
interface interface-type
interface-number
portal bas-ip ipv4-address
portal bas-ipv6 ipv6-address
Command
system-view
323
Remarks
N/A
N/A
By default:
The BAS-IP attribute of an IPv4
portal reply packet sent to the portal
authentication server is the source
IPv4 address of the packet.
The BAS-IP attribute of an IPv4
portal notification packet sent to the
portal authentication server is the
IPv4 address of the packet's output
interface.
By default:
The BAS-IPv6 attribute of an IPv6
portal reply packet sent to the portal
authentication server is the source
IPv6 address of the packet.
The BAS-IPv6 attribute of an IPv6
portal notification packet sent to the
portal authentication server is the
IPv6 address of the packet's output
interface.
Remarks
N/A

Advertisement

Table of Contents
loading

Table of Contents