Specifying The Hwtacacs Authorization Servers - H3C SR8800-F Configuration Manual

Step
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authentication servers.

Specifying the HWTACACS authorization servers

You can specify one primary authorization server and a maximum of 16 secondary authorization
servers for an HWTACACS scheme. When the primary server is not available, the device searches
for the secondary servers in the order they are configured. The first secondary server in active state
is used for communication.
If redundancy is not required, specify only the primary server. An HWTACACS server can function as
the primary authorization server of one scheme and as the secondary authorization server of another
scheme at the same time.
To specify HWTACACS authorization servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authorization servers.
Command
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
authentication server:
primary authentication
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string |
single-connection | vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
authentication server:
secondary authentication
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string |
single-connection | vpn-instance
vpn-instance-name ] *
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
authorization server:
primary authorization
{ ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
authorization server:
secondary authorization
{ ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
43
Remarks
N/A
By default, no authentication
servers are specified.
Two HWTACACS authentication
servers in a scheme, primary or
secondary, cannot have the
same combination of IP address,
port number, and VPN instance.
Remarks
N/A
N/A
By default, no authorization
servers are specified.
Two HWTACACS authorization
servers in a scheme, primary or
secondary, cannot have the same
combination of IP address, port
number, and VPN instance.