Configuring The Maximum Number Of Associated Clients; Enabling Fast Association; Enabling A Service Template; Configuring Wlan Parameters - H3C MSR Series Configuration Manual

Configuring the maximum number of associated clients

Step
1. Enter system view.
2. Create a WLAN service
template and enter WLAN
service template view.
3. Configure the maximum
number of clients allowed to
associate with a radio.

Enabling fast association

Step
1. Enter system view.
2. Create a WLAN service
template and enter WLAN
service template view.
3. Enable fast association.

Enabling a service template

Step
1. Enter system view.
2. Create a WLAN service
template and enter WLAN
service template view.
3. Enable the service template.

Configuring WLAN parameters

Step
1. Enter system view.
2. Specify the maximum client
idle time.
3. Specify the client keepalive
interval.
Command
system-view
wlan service-template
service-template-number { clear |
crypto }
client max-count max-number
Command
system-view
wlan service-template
service-template-number { clear |
crypto }
fast-association enable
Command
system-view
wlan service-template
service-template-number { clear |
crypto }
service-template enable
Command
system-view
wlan client idle-timeout interval
wlan client keep-alive interval
14
Remarks
N/A
You cannot change an existing
service template to another type.
The default is 32.
Remarks
N/A
You cannot change an existing
service template to another type.
By default, fast association is
disabled.
When this function is enabled, the
AP does not perform band
navigation or load balancing
calculation for clients bound to the
SSID.
Remarks
N/A
You cannot change an existing
service template to another type.
By default, the service template is
disabled.
Remarks
N/A
Optional.
The default is 3600 seconds.
Optional.
By default, the client keep-alive
function is disabled.