Removing The Optional Sd Card - SATO S84-ex Operator's Manual

2 Installing the Product
2.7.2

Removing the Optional SD Card

1
Power off the product.
2
Press the card edge slightly to release the
SD card from the SD CARD slot. The SD
CARD slot will immediately release the SD
card .
CAUTION
Do not remove the SD card while the product is accessing the data in the SD card. Doing so may result in
data corruption.
2.7.3 Installing the Optional USB Memory
When using the USB memory for the first time, format the USB memory in the memory card mode. Refer
to Section 4.2.11 Memory Mode
1
Power off the product.
2
Open the top cover.
3
Insert the optional USB memory into the
USB connector (Type A) on the front of
the product.
Contact your SATO reseller for the recommended
USB memory.
4
Close the top cover.
To remove the USB memory from the
product
Power off the product before removing the USB
memory.
CAUTION
Do not remove the USB memory while the product is accessing the data in the USB memory. Doing so may
result in data corruption.
38
S84-ex/S86-ex Operator Manual
for details.
1
2
1