SATO S84-ex Operator's Manual page 256
Hide thumbs
Also See for S84-ex:
- Programming reference manual (452 pages) ,
- Operator's manual (380 pages) ,
- Configuration manual (2 pages)
Table of Contents
Advertisement
5 Emulation Mode
COMPATIBILITY GRAPHICS
Set whether to allow the use of graphic compatible mode.
• ENABLE: Allow the use of graphic.
• DISABLE: Do not allow the use of graphic.
By enabling the graphic compatible mode, the native graphic 'F' can be
printed with line terminator omitted.
BLANK ITEM FEED
Set whether to feed the blank label when the product receives a label-
format that does not contain any printable field.
• ENABLE: Feed the blank label.
• DISABLE: Do not feed the blank label.
SOH COMMANDS
Set whether to ignore all <SOH> commands.
• ENABLE: Ignore all <SOH> commands.
• DISABLE: Do not ignore <SOH> commands.
FORMAT ATTRIBUTE PRIORITY
Set the priority of the format attribute.
Two options can be selected as follows:
• COMMAND: The setting is according to SDPL command.
• LCD: The setting is according to FORMAT ATTRIBUTE screen.
254
S84-ex/S86-ex Operator Manual
Advertisement
Table of Contents
Troubleshooting
