SATO S84-ex Operator's Manual page 258

5 Emulation Mode
1-BYTE CODEPAGE
Select the code page to be used for 1-byte characters from the list.
The options are as follows:
• CP 850
• CP 858
• CP 1252
• UTF-8
• CP 88591
• CP 88592
• CP 88595
• CP 852
Note
Shows only if 1-BYTE CODEPAGE PRIORITY is set to LCD.
MEASURE UNIT PRIORITY
Set the priority of SDPL measure unit.
Two options can be selected as follows:
• COMMAND: The setting is according to SDPL command.
• LCD: The setting is according to MEASURE UNIT screen.
MEASURE UNIT
Set the measurement unit.
• Inch
• mm
Note
Shows only if MEASURE UNIT PRIORITY is set to LCD.
TTF STYLE PRIORITY
Set the priority of the TrueType font style.
Two options can be selected as follows:
• COMMAND: The setting is according to SDPL command.
• LCD: The setting is according to BOLD STYLE screen.
256
S84-ex/S86-ex Operator Manual