Rs-232C Interface - SATO S84-ex Operator's Manual
Hide thumbs
Also See for S84-ex:
- Programming reference manual (452 pages) ,
- Operator's manual (380 pages) ,
- Configuration manual (2 pages)
Table of Contents
Advertisement
8.5.4
RS-232C Interface
No.
1
Check that the RS-232C cable is connected correctly.
2
Check that the cable is not damaged.
3
Check the configuration of the product.
Check the setting of the RS-232C interface through the INTERFACE MODE menu.
4
If there are multiple RS-232C ports on the computer, connect to another port.
5
Power on the product and computer again.
8.5.5
IEEE1284 Interface
No.
1
Check that the product cable is connected to the LPT port of the computer correctly.
2
Check that the cable is not damaged.
3
If you are using a Windows printer driver, check that the correct port is selected.
4
Check the configuration of the product.
Check the setting of the IEEE1284 interface through the INTERFACE MODE menu.
5
Connect to another port.
6
Power on the product again.
8.5.6
External Signal Interface (EXT)
No.
1
Check that the product and external device are connected with a cable correctly.
2
Check that the cable is not damaged.
3
Check that the power of the external device is on.
4
Check the configuration of the product.
Check the setting of the external signal (EXT) interface.
5
Power on the product and external device again.
Item to check
Item to check
Item to check
S84-ex/S86-ex Operator Manual
8 Troubleshooting
317
Advertisement
Table of Contents
Troubleshooting
