Auto Emulation Mode Switching Function - SATO S84-ex Operator's Manual
Hide thumbs
Also See for S84-ex:
- Programming reference manual (452 pages) ,
- Operator's manual (380 pages) ,
- Configuration manual (2 pages)
Table of Contents
Advertisement
5 Emulation Mode
DELIMIT CHAR
Set the delimit character.
The setting range is from 000 (00H) to 255 (FFH).
5.2.1
Auto Emulation Mode Switching Function
Auto emulation mode switching function is added to the SZPL emulation firmware to allow users to easily
switch modes from SBPL to SZPL and vice-versa. The product will automatically detect the type of data
stream it received from the user and automatically switch to the appropriate mode (SBPL mode or SZPL
mode). The auto emulation mode switching function can be disabled by using the <EMU> command.
Note
Due to the S84-ex/S86-ex emulation module design, the standard SBPL functionality have been removed and
the firmware only support minimum set of commands such as ENQ, SOH commands or Test print commands
to work with the AIOT printer management tool continuously. If full functionality is required, select the STD
firmware module from emulation module loader.
250
S84-ex/S86-ex Operator Manual
Advertisement
Table of Contents
Troubleshooting
