SATO S84-ex Operator's Manual page 118
Hide thumbs
Also See for S84-ex:
- Programming reference manual (452 pages) ,
- Operator's manual (380 pages) ,
- Configuration manual (2 pages)
Table of Contents
Advertisement
4 Operation and Configuration
PARAMETER SETTING (ISI)
Set the Bluetooth communication parameter (ISI).
The setting range is from 0012 to 1000.
Note
• Shows only if the Bluetooth interface is selected and DETECTING
SETTING is enabled.
• You cannot set the ISI value if it is smaller than the ISW value.
• The setting will be effective after you power on the product again.
PARAMETER SETTING (ISW)
Set the Bluetooth communication parameter (ISW).
The setting range is from 0011 to 1000.
Note
• Shows only if the Bluetooth interface is selected and DETECTING
SETTING is enabled.
• You cannot set the ISW value if it is greater than the ISI value.
• The setting will be effective after you power on the product again.
PARAMETER SETTING (PSI)
Set the Bluetooth communication parameter (PSI).
The setting range is from 0012 to 1000.
Note
• Shows only if the Bluetooth interface is selected.
• You cannot set the PSI value if it is smaller than the PSW value.
• The setting will be effective after you power on the product again.
PARAMETER SETTING (PSW)
Set the Bluetooth communication parameter (PSW).
The setting range is from 0011 to 1000.
Note
• Shows only if the Bluetooth interface is selected.
• You cannot set the PSW value if it is greater than the PSI value.
• The setting will be effective after you power on the product again.
116
S84-ex/S86-ex Operator Manual
Advertisement
Table of Contents
Troubleshooting
