SATO S84-ex Operator's Manual page 145

MEDIA LENGTH
Set the maximum length of the media to be used.
This function affects the printable area (lengthwise) and media size
checking function. It is necessary to set this value based on the actual
media length to be used.
The setting range varies depending on the following models:
Model Name
S84-ex (203 dpi)
S84-ex (305 dpi)
S84-ex (609 dpi)
S86-ex (203 dpi)
S86-ex (305 dpi)
TRACE MODE
Enable or disable the function to show the product operation status
through icons in online mode. The following operation status are available:
:
Data reception: Shows after receiving any data.
:
Data edition: Shows after receiving ESC (1BH) A.
Print: Shows after a print job.
Each icon will be overwritten and cleared when changing to online mode.
SAVE PRINT LOG
Enable or disable to save the product operation log to a memory card.
• ENABLE: Save the history data to a memory card.
• DISABLE: Do not save the history data to a memory card.
Setting Range Default
(mm) Value (mm)
0 - 2500 2500
0 - 1500 1500
0 - 400 400
0 - 1249 1249
0 -1249 1249
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
143