SATO S84-ex Operator's Manual page 245
Hide thumbs
Also See for S84-ex:
- Programming reference manual (452 pages) ,
- Operator's manual (380 pages) ,
- Configuration manual (2 pages)
Table of Contents
Advertisement
Note
Firmware download may fail if there is insufficient download area for the emulation modules. Delete the
unnecessary emulation module from the memory of product to free up memory space for the new emulation
module download.
INTERFACE SELECT
Select the download method.
• INTERFACE: Download the emulation module from the interface.
• SD CARD: Download the emulation module from an SD card.
• USB MEMORY: Download the emulation module from a USB memory.
DOWNLOAD READY
The product is waiting to receive module data using the selected interface,
which set by DATA PORT in the Interface mode menu.
Note
Shows only if INTERFACE SELECT is set to INTERFACE.
RECEIVING...
The product is receiving the module data.
The bar on the lower portion of the screen indicates the data reception
progress.
After receiving the module data, it goes to the WRITING... screen.
Note
Shows only if INTERFACE SELECT is set to INTERFACE.
WRITING...
The product is writing the module data.
The bar on the lower portion of the screen indicates the data writing
progress.
After writing the module data, it goes to the VERIFYING... screen.
Note
Shows only if INTERFACE SELECT is set to INTERFACE.
5 Emulation Mode
S84-ex/S86-ex Operator Manual
243
Advertisement
Table of Contents
Troubleshooting
