SATO S84-ex Operator's Manual page 97

TRAP IPv4 ADR
Set the IPv4 address where trap is output.
The setting range is from 0.0.0.0 to 255.255.255.255.
Note
Shows only if the SNTP function is enabled.
TRAP IPv6 ADR
Set the IPv6 address where trap is output.
The setting range is from 0000:0000:0000:0000:0000:0000:0000:0000 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF.
Note
Shows only if the SNTP function is enabled.
FINISH SETTING?
Confirm to complete the setting.
• YES: Returns to the user mode screen.
• NO: Returns to the NOTICE FUNCTION screen to select an item.
FTP FUNCTION
Enable or disable the FTP function.
• ENABLE: Enable the FTP function.
• DISABLE: Disable the FTP function.
Note
• Shows only if the LAN or wireless LAN interface is selected.
• The setting will be effective after you power on the product again.
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
95