SATO S84-ex Operator's Manual page 282

6 Adjusting the Product
4
Use the slotted screw driver to turn the adjustment dial . Set the pressure balance
according to the media width and media thickness.
Media Thickness
Media Width
Pressure Balance
Adjustment Dial
Note
• The factory default setting is
• The thickness of the media includes the liner.
280
S84-ex/S86-ex Operator Manual
0.05 to 0.20 mm
(0.002" to 0.0079")
Thin paper/normal label, etc.
30 to 128 mm
S84-ex
(1.18" to 5.04")
80 to 177 mm
S86-ex
(3.15" to 6.97")


.
10 to <30 mm 30 to 128 mm
(0.39" to <1.18") (1.18" to 5.04")
51 to <80 mm 80 to 177 mm
(2.01" to <3.15") (3.15" to 6.97")

0.20 to 0.31 mm
(0.0079" to 0.30122")
Thick paper/tag, etc.
10 to <30 mm
(0.39" to <1.18")
51 to <80 mm
(2.01" to <3.15")
 