Default Setting Mode - SATO S84-ex Operator's Manual

4.2.18 Default Setting Mode

The product can be reset to the default setting as in the factory preset.
The flowchart shows the sequence of the setting screens for the default setting mode. The table
describes each setting screen in detail.
Press the
+ Power On
or
button
Select NO
+ button
button
DEFAULT MODE
Select the item to be initialized.
• PRINTER SETTING: Initialize the settings of the product.
• ALT. PROTOCOL: Initialize the protocol code.
• WLAN SETTING: Initialize the WLAN setting.
Note
WLAN SETTING shows only if a wireless LAN unit is installed.
button
* Press the
select an item accordingly. The
active arrow icons are shown on the
screen.
* WLAN SETTING is available only if a
wireless LAN unit is installed.
Select PRINTER SETTING
+ button
Select YES
+ button
button
Waiting to be powered off.
4 Operation and Configuration
, , or button to
Select ALT.PROTOCOL
+ button
Select YES
+ button
S84-ex/S86-ex Operator Manual
Select WLAN SETTING
+ button
Select YES
+ button
193