Interface Mode - SATO S84-ex Operator's Manual

Hide thumbs Also See for S84-ex:

Table of Contents

4 Operation and Configuration

4.2.10 Interface Mode

The flowchart shows the sequence of the setting screens for the interface mode. The table describes

each setting screen in detail.

S84-ex/S86-ex Operator Manual

Select YES +

Select "SUB PORT" +

Select "DATA PORT"

Setting contents vary depending on the interface.

To the USB setting

To the LAN/WLAN setting

To the RS-232C setting

accordingly. The active arrow icons are shown on the screen.

* Pressing the

button on each screen will revert to the

INTERFACE MODE menu.

Shows only if the

PASSWORD input is

Select "USB"/ "LAN"/ "RS-232C"/ "IEEE1284"

/"Bluetooth"/"WLAN"+

To the IEEE1284 setting

To the Bluetooth setting

button to select an item or set the value

Select "NONE" +