Ribbon Saver Timing Charts - SATO S84-ex Operator's Manual

Hide thumbs Also See for S84-ex:

Table of Contents

Ribbon Saver Timing Charts

Dispenser mode, backfeed after print and pulse input

Print head in

the up position

External signal

PREND(TYPE1)

• Normally the print head is in the down position during backfeed. However, the print head will be lifted

up when the ribbon print position is not identified.

Dispenser mode, backfeed before print and pulse input

Print head in

the up position

External signal

• Normally the print head is in the down position during backfeed. However, the print head will be lifted

up when the ribbon print position is not identified.

Print 1st label

Ribbon saver

Print 1st label

Print 2nd label

Ribbon saver

Print 2nd label

S84-ex/S86-ex Operator Manual