SATO S84-ex Operator's Manual page 173
Hide thumbs
Also See for S84-ex:
- Programming reference manual (452 pages) ,
- Operator's manual (380 pages) ,
- Configuration manual (2 pages)
Table of Contents
Advertisement
PAPER END DISTANCE
Set the distance for detecting paper end.
• DEFAULT: Use a fixed distance maintained in the product to detect
paper end.
• 015mm: Use a distance from 15 to 400 mm to detect paper end.
Note
Shows only if the paper end sensor is set to GAP.
LCD POWER SAVING
Specify a period of time to light off the LCD backlight when the product is
not operated.
The setting range is from 00 to 15 minutes.
Note
This function is disabled if set to 00; the LCD backlight will remain on. For
details, refer to
Section 9.4 LCD Power Saving
LED INDICATION
Set the LED indicator for indicating the product status.
• ON: The LED indicator lights, flashes or off according to the product
status.
• OFF: The LED indicator is always off.
ERROR INDICATION
Set the LCD backlight for indicating an error.
• NONE: No change to the LCD backlight.
• ON: The LCD backlight lights orange.
• BLINKS: The LCD backlight flashes orange.
Mode.
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
171
Advertisement
Table of Contents
Troubleshooting
