SATO S84-ex Operator's Manual page 108

4 Operation and Configuration
LEGACY STATUS FOR PORT 9100
Set the compatibility in the response data configuration of Status with old
models such as M8485Se, M8490Se, M8459Se, M8460Se, M8465Se and
S84.
• ENABLE: Use the data configuration same as old model.
• DISABLE: Use a data configuration different from the old model.
The difference in the response data is as follows:
Status3
ENQ (05H)
response
Status4
CAN (18H)
response
DLE (10H)
response
DC1 (11H)
response
ENQ (05H)
response
Status5
ENQ (05H)
response
Note
This setting does not have to be changed when using the S84-ex/S86-ex
printer driver.
106
S84-ex/S86-ex Operator Manual
ENABLE
prefix: 4 bytes
00H 00H 00H 0BH
ENABLE
1 byte
06H
1 byte
06H
1 byte
06H
prefix: 8 bytes
00H 00H 00H 20H 00H
00H 00H 1CH
ENABLE
prefix: 4 bytes
00H 00H 00H 16H
DISABLE (Default)
prefix: 0 byte
DISABLE (Default)
5 bytes
00H 00H 00H 01H 06H
5 bytes
00H 00H 00H 01H 06H
5 bytes
00H 00H 00H 01H 06H
prefix: 4 bytes
00H 00H 00H 1CH
DISABLE (Default)
prefix: 0 byte