Maintenance - SATO S84-ex Operator's Manual
Hide thumbs
Also See for S84-ex:
- Programming reference manual (452 pages) ,
- Operator's manual (380 pages) ,
- Configuration manual (2 pages)
Table of Contents
Advertisement
7
Maintenance
7.1 Cleaning the Product
A dirty print head or platen roller not only affects the print quality but also causes errors. Use a cleaning
kit or cleaning sheet to clean the product regularly.
CAUTION
• Do not power on or off the product, connect or disconnect the power cord while your hands are wet. Doing
so could cause an electric shock.
• Disconnect the power cord from the AC outlet before you begin cleaning.
The print head and its surroundings are hot after printing. Wait until the product cools down.
• Touching the edge of the print head with your bare hand could cause injury.
• Use a cotton swab or cotton cloth from a cleaning kit to clean. Do not clean with a hard object. Doing so
could cause damage.
• Remove the media and ribbon before cleaning.
Note
The cleaning kit and cleaning sheet are optional. Contact your SATO reseller or technical support center to
purchase the options.
S84-ex/S86-ex Operator Manual
285
Advertisement
Table of Contents
Troubleshooting
