4.2.6
Work Shift Setting Mode
This mode allows for specific production shift information to be printed on a label when used with the
SBPL command.
The flowchart shows the sequence of the setting screens for the work shift mode. The table describes
each setting screen in detail.
Note
• This mode is enabled only if SHIFT CODE is set to YES in the hidden setting mode.
• You can set up to three shifts depending on the number of work shifts required in the field. For example, if
two shifts are required, set work shift number 1 and 2.
SELECT SHIFT
Select the work shift number to store the work shift setting.
You can select the work shift number from 1 to 3.
Note
If you select EXIT and press the
the online screen.
+
buttons
(Press for 5 seconds)
Select EXIT
* When SHIFT CODE is set to YES in the hidden setting mode
+
button
Select other than EXIT +
button
button
button
button
button
ENTER button, the product returns to
4 Operation and Configuration
button
S84-ex/S86-ex Operator Manual
65