Setting Mode Menu - SATO S84-ex Operator's Manual
Hide thumbs
Also See for S84-ex:
- Programming reference manual (452 pages) ,
- Operator's manual (380 pages) ,
- Configuration manual (2 pages)
Table of Contents
Advertisement
4 Operation and Configuration
4.2.8
Setting Mode Menu
In the settings mode menu, the setting modes are shown as follows:
Menu
Online mode
User mode
Interface mode
Memory mode
Service mode
Advanced mode
Hex dump mode
RFID user mode
Information mode
Select the setting mode according to the following procedure:
1
Press the
product to offline mode.
The product changes to offline mode.
2
Press the
The product changes to the setting mode menu.
3
Select the setting mode using the
buttons.
/
/
/
The selected setting mode shows on the screen and
the icon is highlighted by inverting its colors.
4
Press the
72
S84-ex/S86-ex Operator Manual
Returns to online mode.
Access the settings related to the basic user configurations.
Access the settings related to the interfaces.
Access the settings related to the memory.
Access the settings related to the media sensor adjustment and various
functions activation.
Access the settings related to the advanced product configurations.
Access and print the hex dump for troubleshooting.
Access the settings related to the optional RFID module.
Shows only if you have installed the optional RFID kit and enabled the RFID
mode.
Access the information of this product.
LINE button to change the
ENTER button.
ENTER button to enter the selected mode.
Description
Advertisement
Table of Contents
Troubleshooting
