SATO S84-ex Operator's Manual page 49

8
Push the pressure roller release tab  up
to release the pressure roller plate .
9
Pass the liner  through the gap of the
pressure roller plate .
10
Push the center of the pressure roller
plate  to latch it in place.
11
Turn the head lock lever counterclockwise
to lock the print head.
12
Close the top cover.
13
After loading the media and ribbon, perform
a test print to make sure that the media is
loaded correctly.
Refer to Section 4.2.17 Test Print Mode
on how to perform a test print.
CAUTION
When closing the top cover, be careful not to pinch your fingers.
9
for details
3 Loading the Ribbon and Media
10
10
10
S84-ex/S86-ex Operator Manual
8
8
47