2.8.2
Removing the Optional SD Card
1
Power off the printer.
2
Press the card edge slightly to release the
SD card from the SD card slot. The SD
card slot will immediately release the SD
card .
CAUTION
Do not remove the SD card while the printer is accessing the data in the SD card. Doing so may result in data
corruption.
2.8.3
Installing the Optional USB Memory
When using the USB memory for the first time, format the USB memory in the memory card mode. Refer
to
Section 4.2.11 Memory Mode
1
Power off the printer.
2
Open the top cover.
3
Insert the optional USB memory into the
USB connector (Series A plug, 2.0
High-speed) on the front of the printer.
Contact your SATO reseller for the recommended
USB memory.
4
Close the top cover.
To remove the USB memory from the
printer
Power off the printer before removing the USB
memory.
CAUTION
Do not remove the USB memory while the printer is accessing the data in the USB memory. Doing so may
result in data corruption.
for details.
2 Installing the Printer
1
2
1
S84-ex/S86-ex Operator Manual
35