SATO S84-ex Operator's Manual page 134

4 Operation and Configuration
Function Settings
The flowchart shows the sequence of the setting screens for the function settings. The table describes
each setting screen in detail.
132
S84-ex/S86-ex Operator Manual
Select SETTING
+ button
button
button
button
button
button
button
button
button
button
button
button
button
button
button
button
button
button
button
S-A
Proceed to .
* Press the , , or button to select an item or set the value
accordingly. The active arrow icons are shown on the screen.
* Pressing the button on each screen will revert to the SERVICE
MODE setting screen.
Shows only if EXTERNAL REPRINT is set to ENABLE,
REPRINT W/FEED is set to YES, FUNCTION KEY is set to
REPRINT, or CONTINUOUS PRINT is set to ENABLE.
Shows only if EXT 9PIN SELECT is set to MODE3.
Shows only if you have installed the optional RFID kit and
enabled the RFID mode.