Adjusting The Media Stop Position - SATO S84-ex Operator's Manual

3
Change the setting value. Press the
/ buttons to set the desired value.
Set the offset value with '+' to move the print
position opposite the feed direction, and value
with '-' to move the print position in the feed
direction.
The setting value is adjustable by 0.25 mm (0.01")
regardless of the print resolution.
The setting range is from -3.75 mm (-0.15") to
+3.75 mm (+0.15").
4
Press the ENTER button to save the
setting and go to the next adjustment
screen.
6.1.3

Adjusting the Media Stop Position

Adjustment Location
Adjustment Mode: Offset Position
The stop position for options (such as Dispenser) is adjustable within the range of +3.75 mm to -3.75 mm
(+0.15" to -0.15") in the adjustment mode described above.
Adjustment for
"+" value
Adjustment for
"-" value
Note
The above dispensing position for printing indicates the label stop position when the media sensor is set to
Gap sensor.
Adjustment Range
+3.75 mm to -3.75 mm
(+0.15" to -0.15")
Dispensing
position
Media feed direction
No
adjustment
Print position
(Print head)
-3.75 mm (-0.15") ~ +3.75 mm (+0.15")
S84-ex/S86-ex Operator Manual
6 Adjusting the Product
263