SATO S84-ex Operator's Manual page 170

4 Operation and Configuration
RIBBON SAVER
Enable or disable the ribbon saver function.
• ENABLE: Use the ribbon saver.
• DISABLE: Do not use the ribbon saver.
Note
Shows only if the optional ribbon saver is installed. The optional ribbon
saver is only available for the S84-ex.
For details on the ribbon saver function, refer to
Ribbon Saver.
RIBBON SAVER ENABLED ON FEED
Enable or disable the ribbon saver function during feed.
• YES: Use the ribbon saver during feed.
• NO: Use the ribbon saver but not during feed.
Note
Shows only if the optional ribbon saver is installed and enabled. The
optional ribbon saver is only available for the S84-ex.
For details on the ribbon saver function, refer to
Ribbon Saver.
MODE SELECT
Set the communication command mode for analysis.
• XML: Use for supporting Oracle and SAP mode.
• SBPL: Use SBPL (SATO Barcode Printer Language) for the printer
commands.
Note
The setting will be effective after you power on the product again.
JOB MODIFICATION
Set the job modification function.
Use the job modification command <#J> to specify the strings before and
after conversion.
• ENABLE: Enable the job modification function.
• DISABLE: Disable the job modification function.
168
S84-ex/S86-ex Operator Manual
Section 9.9 Optional
Section 9.9 Optional