Hidden Setting Mode - SATO S84-ex Operator's Manual

PROGRAM UPLOAD COMPLETED
This screen shows the completion of the upload.
Three beeps will sound when the program upload is completed.
Press the ENTER button to return to the INTERFACE SELECT screen.

4.2.21 Hidden Setting Mode

This mode allows the operator access to set the label out sensor status and work shift mode status.
The flowchart shows the sequence of the setting screens for the hidden setting mode. The table
describes each setting screen in detail.
LABEL OUT SENSOR
Enable or disable the paper end detection.
• YES: Enable the paper end detection.
• NO: Disable the paper end detection.
SHIFT CODE
Enable or disable the work shift setting mode.
• YES: Enable the work shift setting mode.
• NO: Disable the work shift setting mode.
Note
For details on the work shift setting mode, refer to
Shift Setting Mode.
+ + +
Power on
or button
or button
Section 4.2.6 Work
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
203