SATO S84-ex Operator's Manual page 352

9 Appendix
[When the media pitch size is between the print head position and the I-mark sensor and is more
than 15 mm (0.6").]
• Paper end error will occur while printing the media (1), right after detecting paper end.
• If an error occurs while printing, media (1) will be printed again after releasing the error. If the print
job is completed at the time an error occurs, media (1) will not be printed again.
350
S84-ex/S86-ex Operator Manual
Print head
Media feed direction
(1)
I-mark sensor
15 mm
(0.6")