The normal functioning indicator LED confirms that the component is online. You can also verify correct
MPC functioning by issuing the show chassis fpc command or the correct MIC functioning by issuing
the show chassis fpc pic-status command.
SEE ALSO
Removing a Cable on an MX2020 MPC or MIC | 608
RELATED DOCUMENTATION
Prevention of Electrostatic Discharge Damage | 770
Replacing an MX2020 MIC | 553
Replacing an MX2020 MPC and Adapter Card (ADC) | 536
Replacing an SFP or XFP Transceiver on an MX2020 MPC or MIC | 565
Maintaining Cables That Connect to MX2020 MPCs or MICs | 529
Maintaining Cables That Connect to MX2020 MPCs or MICs
Purpose
For optimum router performance, verify the condition of the cables that connect to the MPCs or MICs.
Action
612