Installing, Removing, And Replacing Emi Covers; Removing The Mx2020 Standard Emi Covers - Juniper MX2020 Hardware Manual

CHAPTER 27

Installing, Removing, and Replacing EMI Covers

IN THIS CHAPTER

Removing the MX2020 Standard EMI Covers | 593

Installing the MX2020 Standard EMI Covers | 594
Replacing the MX2020 Extended EMI Covers | 595
Installing the MX2020 Extended EMI Cover | 602
Removing the MX2020 Standard EMI Covers
The MX2020 router supports a standard or extended set of EMI covers that you can order from Juniper
Networks.
To remove the standard electromagnetic interference (EMI) card cage cover (see
NOTE:
1. Loosen the four captive screws that secure the standard EMI cover to the router.
2. Pull the cover away from the router toward you to remove it.
Figure 256 on page 594):
593