Installing, Removing, And Maintaining Power Components; Replacing An Mx2000 Three-Phase Delta Ac Power Distribution Module; Removing An Mx2000 Three-Phase Delta Ac Power Distribution Module - Juniper MX2020 Hardware Manual

CHAPTER 22
Installing, Removing, and Maintaining Power
Components
IN THIS CHAPTER

Replacing an MX2000 Three-Phase Delta AC Power Distribution Module | 359

Replacing an MX2020 Three-Phase Wye AC Power Distribution Module | 372
Removing an MX2000 Single-Phase AC Power Distribution Module | 383
Installing an MX2000 Single-Phase AC Power Distribution Module | 385
Replacing an MX2000 DC Power Distribution Module (-48 V) | 390
Replacing an MX2000 DC Power Distribution Module (240 V China) | 396
Replacing an MX2020 DC Power Supply Module (-48 V) | 402
Replacing an MX2000 DC Power Supply Module (240 V China) | 408
Replacing an MX2000 AC Power Supply Module | 412
Maintaining the Power Supply Modules on the MX2000 Line of Routers | 418
Maintaining the MX2020 Power Usage | 424
Converting an MX2000 Router Between AC and DC Power | 433
Replacing an MX2000 Three-Phase Delta AC Power Distribution Module

Removing an MX2000 Three-Phase Delta AC Power Distribution Module | 359

1.
Installing an MX2000 Router Three-Phase Delta AC Power Distribution Module | 365
2.
Removing an MX2000 Three-Phase Delta AC Power Distribution Module
NOTE: The MX2008, MX2010, and MX2020 routers support the same power modules (AC/DC
PSMs and AC/DC PDMs).
359