Remx2K-X8-128G Cb-Re Leds - Juniper MX2020 Hardware Manual

REMX2K-X8-128G CB-RE LEDs

Figure 29: REMX2K-X8-128G CB-RE LEDs
1 2
AUX CONSOLE MGMT
ONLINE
DISK1
DISK2
REMX2K-X8-128G
REMX2K-X8-128G
1 ONLINE LED, OK/FAIL LED, and MASTER LED
—
2 DISK1 and DISK2 LEDs
—
Table 17: REMX2K-X8-128G CB-RE LEDs
Label Color
ONLINE Green
-
DISK1 and Green
DISK2
-
BITS, GPS, Green
and UTI LEDs
OK/FAIL Green
Yellow
MASTER Blue
1 2
XGE-0
State
Blinking slowly
Blinking rapidly
Off
Blinking
Off
Blinking
Off
On steadily
On steadily
On steadily
3 4
LINK
BITS
GPS
UTI
XGE-1 EXTCLK-0 EXTCLK-1 OK/FAIL
3 BITS, GPS, and UTI LEDs
—
4 ONLINE/OFFLINE button
—
Description
Routing Engine is in the process of booting BIOS, and the
host OS.
Routing Engine is in the process of booting Junos OS.
Routing Engine is not online or not functioning normally.
Indicates presence of disk activity.
There is no disk activity.
A valid signal is detected on the BITS, GPS or UTI ports.
The link is down due to loss of signal (LOS). Check the cable
and verify the external clock source is generating a valid
signal.
Routing Engine is powering up.
Routing Engine is not powering up, which indicates failure.
This Routing Engine is the Master Routing Engine.
62