Juniper MX2020 Hardware Manual page 112

Figure 34: MX2020 Interface Port Mapping
ge-19/2/0
ge-19/2/1
ge-19/2/2
ge-19/2/3
ge-19/2/4
ge-19/2/5
ge-19/2/6
ge-19/2/7
ge-19/2/8
ge-19/2/9
NOTE: The slot number will be different depending on which slot the MPC and MIC is installed.
The show interfaces terse command displays the four 10-Gigabit Ethernet interfaces, xe-19/0/0, xe-19/0/1,
xe-19/1/0, and xe-19/1/1 that correspond to the four ports on the MIC card that is installed in slot 0 of
the MPC, and twenty Gigabit Ethernet interfaces, ge-19/2/0, ge-19/2/1, ge-19/2/2, ge-19/2/3, ge-19/2/4,
ge-19/2/5, ge-19/2/6, ge-19/2/7, ge-19/2/8, ge-19/2/9 (left side), and ge-19/3/0, ge-19/3/1, ge-19/3/2,
ge-19/3/3, ge-19/3/4, ge-19/3/5, ge-19/3/6, ge-19/3/7, ge-19/3/8, ge-19/3/9 (right side) that correspond
to the twenty ports on the MIC card that is installed in slot 1 of the MPC.
user@host>show interfaces terse
...
lc-19/0/0
lc-19/0/0.32769
pfe-19/0/0
pfe-19/0/0.16383
pfh-19/0/0
pfh-19/0/0.16383
xe-19/0/0
MIC-3D-4XGE-XFP
MIC 0
PORT [0/2]0
xe-19/0/0
PORT [0/2]1
xe-19/0/1
PORT [1/3]0
xe-19/1/0
PORT [1/3]1
xe-19/1/1
MIC-3D-20GE-SFP
ge-19/3/0
0 0
ge-19/3/1
1 1
ge-19/3/2
2 2
ge-19/3/3
3 3
ge-19/3/4
4 4
ge-19/3/5
5 5
ge-19/3/6
6 6
ge-19/3/7
7 7
ge-19/3/8
8 8
ge-19/3/9
9 9
MIC 1
up up
up up vpls
up up
up up inet
inet6
up up
up up inet
up down
89