Maintaining And Verifying The Status Of The Mx2020 Craft Interface - Juniper MX2020 Hardware Manual

SEE ALSO
Installing the MX2020 Craft Interface | 582
Removing the MX2020 Craft Interface | 581

Maintaining and Verifying the Status of the MX2020 Craft Interface | 589

Maintaining and Verifying the Status of the MX2020 Craft Interface
Purpose
Verify the system status of the craft interface.
Action
On a regular basis, check the status of the craft interface.
To display the status of the craft interface, issue the show chassis craft-interface command.
user@host> show chassis craft-interface
Front Panel System LEDs:
Routing Engine
--------------------------
OK
Fail
Master
Front Panel Alarm Indicators:
-----------------------------
Red LED *
Yellow LED *
Major relay *
Minor relay *
Front Panel FPC LEDs:
FPC 0 1
-----------------------------------------------------
Red . .
Green . .
Front Panel FPC LEDs:
FPC 10 11
------------------------------------------------------
Red . .
0 1
* *
. .
* .
2 3 4 5
. . . .
. . * .
12 13 14 15
. . . .
6 7 8 9
. . . .
. * * .
16 17 18 19
. . . .
589