Installing A Mx2020 Router Using A Pallet Jack Overview - Juniper MX2020 Hardware Manual

Tools Required to Install the MX2020 Router Using a Router Transport Kit | 224
Installing the MX2020 Router Using a Router Transport Kit | 270
Reinstalling Components in the MX2020 Router After Installing in a Rack | 277

Installing a MX2020 Router Using a Pallet Jack Overview

Because of the MX2020 router's size and weight—1,515 lb (687.19 kg) depending on the configuration—we
strongly recommend that you install the router using a pallet jack with pallet jack attachment.
NOTE: Juniper Networks offers a router transport kit to install the router (see
MX2020 Router Using a Router Transport Kit" on page
1. Verify that the mounting hardware has been installed.
See: "Installing the MX2020 Mounting Hardware for a Four-Post Rack or Cabinet" on page 239
2. Remove the router from the shipping crate:
See: "Overview of Unpacking the MX2020 Router" on page 227
3. Gather the tools required to install the router.
See: "Tools Required to Install the MX2020 Router Using a Pallet Jack" on page 223
4. Remove the components.
See: "Removing Components from the MX2020 Router Chassis Before Installing it in a Rack" on page 245
5. Install the MX2020 using the pallet jack attachment.
See: "Installing the MX2020 Router Using a Pallet Jack with Attachment" on page 260
6. Reinstall the components.
See: "Reinstalling Components in the MX2020 Router After Installing in a Rack" on page 277
"Installing the
270).
258