Yy - Location; General Handling Of Error Messages - Sirona GALILEOS Service Manual

Sirona Dental Systems GmbH
Service Manual GALILEOS
yy Location/Function unit
06 X-ray tube assembly
07 Easypad user interface (GALILEOS Comfort)
71 Multipad user interface (GALILEOS Compact)
10 System hardware
11 System software
12 CAN bus
13 Stand peripherals
14 Digital extension
15 Configuration/update (wrong software, wrong module constellation, etc...)
41 Media interface card
42 Remote control
89 X-ray detector
61 25 665 D3437
D3437.076.01.15.02 06.2012
5.4.3

yy - Location

yy - Location
Identifier yy defines the location or logical function unit where the error
has occurred.
The location may be a DX module number standing for an entire HW
function unit, or a logical SW function unit on board DX11 (central
control).
5.4.4

General handling of error messages

General handling of error messages
Error messages must always be acknowledged with the R key.
If trouble-free operation is possible after the error is acknowledged, then
no further action is necessary.
If error messages occur again or frequently, or if fault-free operation is not
possible, run an error diagnosis (see chapter entitled
"Troubleshooting [ → 125]"). In some cases it can be advisable to obtain
more information about the history or frequency of the errors from the
error logging memory (S007) and from
details..."
(see chapter entitled "Opening Extended Details); see also
chapter entitled "Error logging memory [ → 125]".
5 Messages
5.4 Error messages
Board
DX6
DX7
DX71
DX11/DX1
DX11/DX1
DX11/DX1
DX11/DX1
DX11/DX1
DX11/DX1
DX41
DX42
DX89
"SiXABCon" "Properties"
/
"More
/
87