Location 10: System Hardware - Sirona GALILEOS Service Manual

5 Messages
5.5 List of error messages
Error code Description
E7 10 01 EEPROM cannot be written.
Error code Description
E7 10 02 FPGA of DX1 is not addressable.
FPGA = Field Programmable Gate
Array
Error code Description
E1 10 03 The flash file system must be
formatted.
Occurs after replacement of board
DX11.
Error code Description
E1 10 04 Flash file system formatting in
progress.
Error code Description
E1 10 05 Flash file system is not ready for
operation.
Error code Description
E7 10 06 Incompatible DX1-FPGA
(programmable logic component)
version for current operating mode.
98
5.5.3

Location 10: System hardware

Location 10: System hardware
Actions required
● Acknowledge error and repeat procedure.
If the error occurs repeatedly ...
● Replace board DX11.
E7 10 02
Actions required
● Replace board DX1.
E1 10 03
Actions required
● Acknowledge error and repeat procedure.
The flash file system is formatted and error
code E110 04 is displayed.
E1 10 04
Actions required
● Wait until the error code automatically
disappears (approx. 2 - 3 mins).
E1 10 05: GALILEOS
Actions required
● Execute service routine S009.4 and
format flash file system.
The contents of the error memory are thus lost.
If the error occurs repeatedly ...
● Replace board DX11.
E7 10 06 GALILEOS Actions required
● Check the hardware version of DX1 for
compatibility, replace board DX1 if
necessary.
Sirona Dental Systems GmbH
Service Manual GALILEOS
see
S. [ → 350]
see
S. [ → 343]
see
see
see
S. [ → 241]
S. [ → 350]
see
S. [ → 343]
61 25 665 D3437
D3437.076.01.15.02 06.2012