Maintenance; Calibrating The Unit - Sirona GALILEOS Service Manual

Sirona Dental Systems GmbH
Service Manual GALILEOS
61 25 665 D3437
D3437.076.01.15.02 06.2012
10

Maintenance

Maintenance
DANGER
Potentially lethal shock hazard!
It is essential to switch the unit off and to wait at least 1 minute, or 4
minutes if disconnecting the tube assembly (cable L3), before starting
the maintenance or taking off a cover panel!
CAUTION
Risk of electric shock!
Always switch the unit off before ...
...connecting a measuring instrument or
...carrying out continuity checks.
NOTICE
Risk of damage to boards
Please observe the usual precautionary measures for handling printed
circuit boards (ESD). Touch a ground point to discharge static electricity
before touching any boards.
NOTICE
Risk of damage to tube assembly
Keep to the prescribed cool-off periods if several exposures have to be
taken to check a measured value.
IMPORTANT: Select the correct current/voltage type and adjust the
measuring range to match the expected readings.
10.1

Calibrating the unit

Calibrating the unit
Unit calibration is described in detail in the chapter entitled Adjusting/
calibrating the unit [ → 155] .
10 Maintenance
10.1 Calibrating the unit
369