Ring Motor (M1_3); Replacing The Ring Motor - Sirona GALILEOS Service Manual

Sirona Dental Systems GmbH
Service Manual GALILEOS
Removing the covers
Removing the defective motor
F
A
B
61 25 665 D3437
D3437.076.01.15.02 06.2012
9.3

Ring motor (M1_3)

Ring motor (M1_3)
9.3.1

Replacing the ring motor

Replacing the ring motor
➢ Remove the "arm cover".
D
X813
E
C
X804
1. Detach the motor cable from the cable harness and pull it off of
connector X813 on board DX1.
2. Loosen the four screws (A) on the ring motor and remove the motor
including the screws and the serrated washers (B).
9 Repair
9.3 Ring motor (M1_3)
301