Calling The "Adjustment/Calibration" Menu - Sirona GALILEOS Service Manual

Sirona Dental Systems GmbH
Service Manual GALILEOS
Easypad
Multipad
61 25 665 D3437
D3437.076.01.15.02 06.2012

Calling the "Adjustment/Calibration" menu

7.1.2.1
Calling the "Adjustment/Calibration" menu
Call in GALILEOS
You can call the
"Utilities" "Constancy test..."
/
exposure "
/Password prompt/
functions"
"Select X-ray device"
The
only displayed if more than one unit has been set up in SIDEXIS XG.
Password protection
GALILEOS password
"Service functions"
The
digits of the current system date (PC) in reverse order as the password.
For example: On 05/30/2010, the service password is 5003.
Service mode
GALILEOS service
When you open the
mode to the PC service mode logged by the PC. In PC service mode, the
control options that are available on the control panel are determined by
SIDEXIS XG and the service routine currently selected. General control
of the unit by means of the control panel (as in the user mode) is not
possible in this mode.
Easypad overview (GALILEOS)
Service mode is displayed on the Easypad via the PC service image.
GALILEOS service mode
"SERVICE" is displayed on the Multipad to indicate that the service mode
is active.
7.1 General information about unit adjustment and calibration
"Service functions"
menu via SIDEXIS XG:
"3D" "Select X-ray device"
/ /
"Select X-ray component"
"Select X-ray component"
and
menu is password-protected. Enter the first four
"Service functions"
menu, the unit switches from user
7 Adjusting/calibrating the unit
"Service
/
"Service
/
prompts are
161