Status Information - Keysight B2980B Series User Manual

Front Panel Reference
Display and Assist/Function Keys

Status Information

The status information is common for all display modes. It is displayed above the
bottom softkeys associated with the function keys.
Table 4-6
Label Color
AUTO white Trigger auto. Automatic trigger is enabled.
ARM white Trigger active. Trigger system is active.
High voltage. Output voltage setting is over 21 V.
HV yellow
The low terminal of the voltage source is disconnected from the circuit common, and is in
floating status.
The inner shield of the Voltmeter input connector (triaxial) is connected to the guard.
Battery operation indicator (B2983B/B2987B). This indicates the remaining battery level
when the instrument is powered by the battery.
REM white Remote. Instrument is in the remote state.
Local lockout.
Instrument is in the local lockout (LLO) status.
ERR white Error. At least one error is detected.
EDIT green Edit mode. The field specified by the pointer can be edited. Not in the move mode.
MOVE blue Move mode. The field pointer can be moved. Not in the edit mode.
LAN green or LXI LAN status indicator. Green indicates normal LAN status. Red indicates abnormal
red condition. Blinking indicates the LAN identification status.
1 white Display mode: Meter view
G white Display mode: Graph view
R white Display mode: Roll view
H white Display mode: Histogram view
168
Status Indicator
Description
Keysight B2980B User's Guide, Edition 1
1