Dip Switch On Intelligent Tap - Omron F3SG-SRB Series User Manual

Hide thumbs Also See for F3SG-SRB Series:
Table of Contents

Advertisement

Setting with Intelligent Tap

3-5. DIP Switch on Intelligent Tap

Make sure the Responsible Person tests the operation of the F3SG-SR after setting with the DIP
Switch on the F39-SGIT-IL3 to verify that the F3SG-SR operates as intended. Make sure to stop
the machine until the test is complete. Unintended settings may cause a person to go
undetected, resulting in serious injury.
The table below lists the positions and assigned functions of the DIP Switches on the Intelligent Tap.
Position
1
2
3
4, 5
6, 7
8
When the DIP Switch Position 1 is set at ON (Lock), Position 2 at ON (DIP Switch Enabled) and Positions 3 to 8 at OFF*,
the functions assigned to the Positions 3 to 8 operates according to the settings of the OFF positions and the following
functions are set as described in the table below.
PSDI
Muting
Teach-in
Area Beam Indicator
Warning Zone
Reduced Resolution
* Refer to 2-1. Combination of Functions for settings to be affected when any of Positions 3 to 8 is set at ON.
F3SG-SR
134
User's Manual
Function
Lock/Unlock
DIP Switch Enable/Disable
EDM
Interlock/Pre-Reset
Fixed Blanking/
Floating Blanking
Operating Range Selection
Item
PSDI
Muting
Zone setting
Teach-in Input
Output operation mode of Area Beam Indicator
Warning Zone
Reduced Resolution
Setting
Unlock
1
ON
Lock (factory default setting)
1
ON
DIP Switch Disabled (factory default setting)
2
ON
DIP Switch Enabled
2
ON
EDM Disabled (factory default setting)
3
ON
EDM Enabled
3
ON
4
ON
Auto Reset (factory default setting)
5
ON
4
ON
Pre-Reset
5
ON
4
ON
Manual Reset (Start/Restart Interlock)
5
ON
4
ON
Auto Reset (same as Auto Reset (factory default
setting))
5
ON
6
ON
Blanking Disabled (factory default setting)
7
ON
6
ON
Fixed Blanking Enabled
7
ON
6
ON
Floating Blanking Enabled
7
ON
6
ON
Blanking Disabled (same as Blanking Disabled
(factory default setting))
7
ON
Long (factory default setting)
8
ON
Short
8
ON
Function
: Indicates a switch position.
Description
Setting
Disable
Enable
All beams
Enable Teach-in by Push Switch
Block/Unblock Information
Disable
Disable

Advertisement

Table of Contents
loading

This manual is also suitable for:

F3sg-sr seriesF3sg-sra series

Table of Contents