Area Beam Indicator (Abi) - Omron F3SG-SRB Series User Manual

Setting with SD Manager 3

4-3-3-3. Area Beam Indicator (ABI)

First, carry out 4-3-1. Preparing to Change Settings.
Next, on the Top page, click the icon below.
The setting screen below is displayed.
No. Function name
1 Output
operation mode
of ABI
2 Output
operation mode
of ABI
3 Inverted signal
output of ABI
pattern
4 ABI output
pattern
F3SG-SR
200
User's Manual
Description
Select the operation mode of the area
beam indicator (ABI).
Items 2 to 4 below can be set only
when [Output Information] is
selected.
Select the information/signal
output by ABI.
Select Enable or Disable for the
inverted setting of ABI patterns.
Select an ABI output pattern.
Initial value Configurable value or numerical range
Block/Unblock Disable/Block/Unblock Information/
Information Input signal linkage/Output information
Safety output
Red
information
ABI, refer to Information (Output
Stable-state
operation mode) assigned to Auxiliary
Orange
information
output of 4-3-3-1. Auxiliary Output.
Safety output
Green
information
Red Enable Enable/Disable
Orange Enable
Green Disable
Red Solid-ON Illuminate/ON once/ON twice/ON three
times
Orange ON 1 time
Green Solid-ON
For the information assigned to