Warning Log - Omron F3SG-SRB Series User Manual

Setting with SD Manager 3

4-4-3-2. Warning Log

This function can be used only when the F3SG-SR is connected to the Intelligent Tap and a PC.
Select [Warning Log] from the [Maintenance Information] list in the [Menu] window.
The screen below is displayed. Click a warning item you want to view and the cause and measures of the
warning item is displayed.
No.
1 Warning Log Information
(Receiver)
2 Warning Log Information
(Emitter) *
3 Show error descriptions
4 Save maintenance
information
* The warning log information of the emitter is displayed only when the sensor is connected in the Wired Synchronization.
• Refer to 8-1-3. Warning for more information on the warning codes and descriptions.
• Refer to 2-26-4. Power-ON Time for more information on the accumulated power-on time.
• Warning logs are only displayed for a sensor segment selected in the Target sensor section.
• Up to 50 past warnings can be recorded. Up to last five logs are displayed without logging in.
• When the F3SG-SR is in a cascade connection, select a desired sensor segment from the [Target sensor]
button
F3SG-SR
230
User's Manual
Function
Shows warning logs including warning codes, warning descriptions and accumulated
power-on time at the time when warnings occurred, with the most recent warnings first for
the receiver.
Shows warning logs including warning codes, warning descriptions and accumulated
power-on time at the time when warnings occurred, with the most recent warnings first for
the emitter.
Click an error or warning log to show details, cause and measures of the event.
Saves error and warning logs, Intelligent Tap log, power-on time, accumulated power-on
time, load switching frequency and accumulated load switching frequency as a .csv file.
in the top right corner of the screen.
Description