Omron F3SG-SRB Series User Manual page 290

Wiring and Installation
 Side Mounting
Adjustable
Side-Mount
Bracket
(F39-LSGA)
Adjustable
Side-Mount
Bracket
(F39-LSGA)
Dimension C
Dimension D
Dimension P
*The number of brackets required to mount either one of emitter and receiver.
5-3-4-2. Mounting with Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- The Adjustable Side-Mount Bracket allows beam alignment after fixing the bracket to a wall surface. The angle
adjustment range of the Adjustable Side-Mount Brackets is ±15°.
F3SG-SR
262
User's Manual
50
38
23.5
10
4-digit number of the type name (Protective height: )
F3SG-SR-14
F3SG-SR-25
F3SG-SR-45
F3SG-SR-85
F3SG-SR-14
F3SG-SR-25
F3SG-SR-45
F3SG-SR-85
32
46.7
C-20
C-40
Protective height Number of Adjustable
(Dimension C) Side-Mount Bracket *
10
20 0160 to 0280
0320 to 1440
40
1520 to 2480
80
2-M5
or M6
2-M5
or M6
<Screw: M5 or M6>
[ Unit : mm ]
Dimension F
1 1000 mm max.
2 1000 mm max.
3 1000 mm max.