3.
Securely tighten the Mounting Screws to fix the Side-Mount Bracket to the sensor housing. The
recommended torque to tighten the Mounting Screws is 3.0 N•m. Then loosen the Alignment Screws
(hexagon socket head cap screws (M4×22)). (Fig. 3)
Securely
Mounting Screw
tighten
Securely
Mounting Screw
tighten
Mounting Screw
Tightening screws with a torque that considerably exceeds the recommended torque may cause failure.
5-3-4-2. Mounting with Adjustable Side-Mount Brackets (Intermediate
Brackets) (F39-LSGA)
1.
Securely tighten the screws to fix the Adjustable Side-Mount Bracket to the mounting position of the
wall surface. When using more than one Adjustable Side-Mount Brackets, align them in the same line
using the sides of the brackets that do not face the wall, before attaching the bracket to the sensor.
(Fig. 1)
M5/M6
Screws to mount the brackets to the wall are not included.
Fig. 3
<Backside mounting>
Fig. 1
Wiring and Installation
<Side mounting>
M5/M6
E
F3SG-SR
277
User's Manual