Intelligent Tap - Omron F3SG-SR Series Manual

Intelligent Tap F39-SGIT-IL3
Model
Applicable sensor
Response time
Performance
Startup waiting time
Power supply voltage (Vs)
Current consumption
Safety outputs (OSSD)
/Auxiliary output
Digital output for pin 2 (IO-Link)
*
* For the DO (pin 2) of CN3
Electrical
Input voltage
Overvoltage category
(IEC 60664-1)
Protective circuit
Insulation resistance
Dielectric strength
Functional Maintenance Information
Ambient
temperature
Ambient
humidity
Environmental
Degree of protection (IEC 60529)
Vibration resistance (IEC 61496-1)
Shock resistance (IEC 61496-1)
Pollution degree (IEC 60664-1)
To sensors, control box and IO-
Link
Connections Connection
Cable extension
IO-Link version
Baud rate
IO-Link
communications
Data length
Minimum cycle time
Material
Weight
Included accessories
F3SG-SR Series
Output ON to OFF and OFF to ON: 44 ms max. each *
* The response time is the time interval between the changes of the states of the sensor OSSD's and the DO (pin 2).
3 s max.
Supplied from external power source: SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
USB bus powered: 5 VDC
85 mA max. (When connecting 24 VDC power supply and IO-Link Master)
Refer to the ratings and specifications of the F3SG-SR. The safety outputs and auxiliary output of the
Intelligent Tap are directly connected to those of the F3SG-SR.
One PNP transistor output
Load current: 100 mA max., Residual voltage: 2 V max., Leakage current: 1 mA max.
The DO is in the OFF state when the safety outputs are in the ON state. The DO is in the ON state when the
safety outputs are in the OFF state. (Regardless of the PNP/NPN setting of the F3SG-SR)
PNP
ON voltage: Vs-3 V to Vs (short circuit current: approx. 9.5 mA) *2
OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 13.0 mA) *2
RESET, EDM
NPN
ON voltage: 0 to 3 V (short circuit current: approx. 13.0 mA)
OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 9.5 mA) *2
PNP
ON voltage: Vs-3 V to Vs (short circuit current: approx. 4.5 mA) *2
MUTE A/B,
OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 7.0 mA) *2
PRE-RESET,
NPN
PSDI *1
ON voltage: 0 to 3 V (short circuit current: approx. 7.0 mA)
OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 4.5 mA) *2
*1. PSDI is only available for F3SG-SR.
*2. The Vs indicates a supply voltage value in your environment.
II
Output short-circuit protection, Output reverse polarity protection
20 MΩ or higher (500 VDC megger)
1,000 VAC, 50/60 Hz (1 min)
Error Log
Power-ON Time
Operating -30 to 55 °C (non-icing)
Storage -30 to 70 °C
Operating 35% to 85% (non-condensing)
Storage 35% to 85%
IP65, IP67 and IP67G (Covers and cables connected with the Intelligent Tap.)
10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
100 m/s 2 , 1000 shocks for all 3 axes
3
M12 connectors: 8-pin (CN1: receiver and CN2: control box) and 5-pin (CN3: IO-Link and CN4: emitter),
IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated.
* The F3SG-SR meets the degree of protection when the root cable of the F3SG-SR is correctly connected
with the F3SG-SR.
USB Type-C
20 m max. between IO-Link Master and Intelligent Tap, 4 m max.* between PC and Intelligent Tap via USB
cable
* It is not guaranteed that the Intelligent Tap is connectable to any PC or USB cable. Verify the connection
with the USB cable you use.
Version 1.1
COM3: 230.4 kbps
PD: 4 bytes, OD: 32 bytes (M-sequence type: TYPE_2_V)
12 ms
PBT resin
F39-SGIT-IL3: 180 g (when packaged), F39-LITF1: 50 g (when packaged)
Instruction Sheet and M12 Connector Cover (2 pcs)
F3SG-SR/PG
F39-SGIT-IL3
53