Omron F3SG-SRB Series User Manual page 292

Wiring and Installation
 Side Mounting
Adjustable Top/Bottom
Bracket (F39-LSGTB-SJ)
Side-Mont Bracket
(F39-LSGF)
Adjustable Top/Bottom
Bracket (F39-LSGTB-SJ)
4-digit number of the type name (Protective height: )
Dimension C
Dimension D
Dimension G
Dimension H
Dimension I
Dimension N1
Dimension N2
Dimension P
*1. Side-Mount Bracket: M5 or M6
*2. For the model of protective height of 0160, the numbers corresponding to dimensions N1 and N2 are 20 to 30.
*3. The number of brackets required to mount either one of emitter and receiver.
*4. The side-mount brackets (intermediate brackets) are included with the light curtain.
5-3-4-3. Mounting with Adjustable Top/Bottom Brackets (F3SJ, F3SN Adapter) (F39-LSGTB-SJ) and Side-Mount
Brackets (Intermediate Brackets) (F39-LSGF)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- Beam alignment cannot be performed in combination with Adjustable Top/Bottom Brackets and Side-Mount Brackets
with the Brackets fixed to the wall surface.
F3SG-SR
264
User's Manual
50
38
19
1.7
F3SG-SR-14
F3SG-SR25
F3SG-SR-45
F3SG-SR-85
C+27.2+N1+N2
C+38+N1+N2
C+58+N1+N2
0 to 30 *2
0 to 30 *2
F3SG-SR-14
F3SG-SR-25
F3SG-SR-45
F3SG-SR-85
3.2
32
Top/Bottom Bracket: M5 *1>
46.7
C-20
C-40
Protective height
(Dimension C)
10
20
0160 to 0840
40
0880 to1680
80
1760 to 2480
19
2-M8
4-M5
2-M5 2-M5
or M6 or M6
19
<Screw for Adjustable
<Screw for Adjustable
Top/Bottom Bracket: M8 *1>
[ Unit : mm ]
Number of
Number of
Adjustable
Intermediate Dimension F
Top/Bottom
Bracket *4
Bracket *3
2 0
2 1 1000 mm max.
2 2 1000 mm max.
-