Scanner Errors - Xerox Phaser 3330 Service Manual

Scanner Errors

Scanner Door Open
A DADF door is open error occurred.
Applicable Error
• 05-920: DADF Top Cover Open
Initial Actions
• Turn the printer off and then on again.
• If the problem persists continue troubleshooting.
Troubleshooting Procedure Table
Step Actions and Questions
1. Close the DADF Top Cover.
Does the error persist?
2. Check the sensor actuator on the underside
of the DADF Top Cover.
The actuator is intact.
3. Enter dC330 Component
05-190 to check the DADF Top Cover Open
Sensor
The sensor operates correctly?
4. Install a new DADF Board (PL 8.1A.13,
List 8.1A WorkCentre 3345
Does the error persist?
Xerox Internal Use Only
Yes
Go to Step 2.
Go to step 3.
Control, code Go to step 4.
Parts Install a new Main PWB:
DADF). Phaser 3330 (PL 1.0.7,
Parts List 1.0 Phaser
3330
3335 and 3345 (PL 6.1.7,
Parts List 6.1 WorkCentre
3335/3345
No
Complete.
Install a new DADF TOP
Cover (PL 8.1A.1,
List 8.1A WorkCentre
3345
Instal a new Photo
Interruptor (PL 8.5.1,
Parts List 8.5 WorkCentre
3345 Drive
Complete.
Main), WorkCentre
Main).
Phaser 3330 and WorkCentre 3335/3345
Troubleshooting
Parts
DADF).
DADF).
2-79
Service Manual